November 20 2012
The most common paper size used for general printing (UK), stationery and publications.
(Illustrator) is a vector-based drawing program developed and marketed by Adobe Systems.
Adobe Photoshop, or simply Photoshop, is a graphics-editing program developed and published by Adobe Systems. It is the current and primary market leader for commercial bitmap and image manipulation.
Finished layout of typesetting, drawings and photographs, made up in a form, which is ready for the printer to print from.
Customer's corrections/changes made, normally at the proofing stage.
Less common paper sizes which are used mainly for bigger jobs. E.g. Posters, wall charts etc.
To print on the reverse side of a printed sheet.
A grid of pixels or printed dots generated by computer to represent type and images.'Bitmapping' is a term often used to describe the effect where edges of a picture take on a blocky/jagged shape due to errors in image processing or poor resolution.
Printing where the colour continues off the edge of the paper.
Process of raising letters, logos or designs on card or tough paper onto which no printed image has been added.
To impress or stamp a design upon a cover. The design can be blocked in colour inks, gold leaf or metal foil. Most commonly used on case bound book covers.
While there is no internationally agreed rule, paper exceeding 170 gsm is usually referred to as board.
Thickness of paper.
Paper sizes used for envelopes, designed to take A size paper.
Letters, which stand for Cyan (C), Magenta (M), Yellow (Y) and Key(black) (K). Full colour printed images are made up of these component colours.
A special water based coating, which is applied to printed matter to protect literature from ink smudging or finger marking or to enhance appearance. The main types are sealer, gloss, matt and silk. Coatings are commonly used on matt or silk coated paper as these types are more prone to smudging than gloss coated paper. The main difference between a varnish and a coating is that coatings are faster drying and therefore jobs can be turned around quicker. They tend to be more scuff resistant than varnishes and there is also less risk of yellowing paper. However, oil based varnishes are better if specific areas of a document need to be coated. (Spot varnish)
The arranging of printed sheets into the desired sequence.
Specifications on a piece of artwork to a printer, showing the required colours for the item to be printed.
Process by which an image is separated into the four colours for print production.
The process of producing printer's plates directly from the computer (CTP) with no films involved.
When the middle pages of a folded section extend slightly beyond the outside pages.
Printed lines on the edge of paper indicating where the paper should be cut to produce the correct page size.
A shaped cut out leaflet or brochure.
Printing straight from electronic artwork (no plates used as with litho print). Typically printed out of four colour process. Ideal for short runs up to about the 1,000 mark and is usually faster.
Proofing direct from digital files instead of using film.
A standard envelope size measuring 110mm x 220mm. They take A4 sheets, folded into three.
Dots per inch, which indicate the resolution of images. The more dots per inch, the higher the resolution and the better quality the image. 300 dpi is the ideal resolution for print.
Printing on both sides of a sheet of paper. Term applies to digital printing presses.
An image or job printed using two colours only.
Drilling of holes in printed literature allowing insertion over rings in a binder.
A sample of a proposed job made up with the actual materials and cut to size to show bulk etc.
Plastic coating providing a rigid, watertight covering for printed matter.
The process of raising letters or designs on card or paper.
Encapsulated Postscript File. This is a file format, which can be read across different programs on MAC or PC computers.
All operations after printing (i.e guillotining, folding, binding, etc).
A set of letters, numbers and symbols that share a unified design. The design (style) is called a typeface.
Full colour printing using four constituent colours: Cyan (C), Magenta (M), Yellow (Y) and Key(black) (K).
Number of similar items printed on one sheet of paper.
Printed four colours on one side only. (4/0)
Printed four colours on one side and one colour on the reverse. (4/1)
Printed four colours on one side and two colours on the reverse. (4/2)
Printed 4 colours on both sides. (4/4)
File Transfer Protocol (FTP) is a network protocol used to transfer data from one computer to another through a network such as the Internet.
Grammes per square metre. Standard measure of paper weight.
A coating applied to printed matter which is quick drying and protects literature from ink smudging and finger marking and gives a gloss finish.
Machine made paper is made up of many fibres, which tend to line up in one direction due to the nature of the process. This produces a preferred direction or grain along which it is easier to fold, bend or tear paper.
A varnish applied to printed matter to protect against smudging and finger marking and gives a gloss finish. Please refer to coating to see the difference between varnishes and coatings.
A device on a printing machine for holding the sheet during the printing or finishing process.
The margin of paper along the gripper edge of the sheet, which is held by the gripper and cannot be printed on.
The inside margins or blank space between 2 facing pages is the gutter. The gutter space is that extra space allowance used to accommodate the binding in books and magazines.
Spots or imperfections in printed items due to dirt on press, dried ink, paper particles etc.
Plans for the arrangement of the pages of a job so that they will follow in the correct sequence when folded.
Leaflet or other printed material inserted loose in a publication or mailing package.
Joint Photographic Experts Group. A type of file format for image files.
A shaped cut out from two layered stock - mostly used for peel off stickers.
A thin plastic film used on the covers of printed literature to give protection. This can be gloss or matt finish.
The set-up of printing equipment before running a job.
A coating applied which is quick drying and protects literature from ink smudging and finger marking and gives a matt finish.
A varnish applied to printed literature to protect against smudging and finger marking and gives a matt finish.
The process of mechanically folding printed paper.
A general varnish applied to printed literature to protect or seal against smudging or finger marking.
Instrument for measuring thickness of paper.
All the items needed to put together and print the job. i.e Artwork, photography, typesetting etc.
The extra printed products delivered to a customer over and above the net amount ordered.
International system of designating colours for printing reference.
Portable Document Format. A PDF is a special file type that combines, images, drawings, layouts and text into one file for easy delivery to or from the printer. PDF's provide a very useful tool for proofing purposes as what you see is what you get.
Pages of a book, which are glued together to give a square spine.
A printing press, which prints on both sides of a sheet of paper in one pass.
Running a dotted score into paper to allow the paper to be torn off easily.
Where data elements are unique to an individual print piece. Concept facilitated by digital printing. Most commonly used on direct mail literature.
A metal plate, which has the inked images involved in the offset plate lithography printing process. It is important to realise that each colour in a printing job requires a separate plate.
The four colours which make up full colour printing. Cyan, Magenta, Yellow and Black.
A sample of work to be checked for errors in text, positioning or quality of colour reproduction. This can be in both paper and PDF forms.
Accurate positioning of images on a sheet relative to one another.
Refers to the degree of detail of an image. It is usually measured in dots per inch (dpi) or lines per inch (lpi). A high resolution gives a high quality image and vice versa.
Type appearing white on a black or colour background, which is either a solid or a tint.
3 colour split (Red, Green, Blue). Typically used for web based images. RGB images must not to be used in artwork for print. Although RGB images can be converted to CMYK in the RIP process, unusual and unwanted results may occur.
Raster Image Processor. A processor which converts files into a format ready for printing.
When the pages of a printed document (i.e. magazine) are bound together using metal staples.
The equipment, which converts colour transparencies or hard copy colour artwork into images on a Mac or PC.
The name given to colour transparencies or colour artwork, which have been converted to images on an MAC or PC.
A coating applied to printed matter, which is quick drying and protects literature from ink smudging and finger marking and gives a neutral finish. A sealer varnish is applied to printed matter to protect against finger marking and gives a neutral finish.
The paper used inside a booklet is the same as that used for the cover.
During the printing process, this is the unintentional transfer of wet ink to another sheet.
Printing presses, which are fed by, separate sheets of paper. As opposed to paper on a roll. They are suitable for all types of commercial printing, particularly high quality work.
The degree to which printing is visible through paper. Commonly seen on lightweight papers.
Method of packing printed products by surrounding them by plastic, then shrinking by heat.
A coating applied to printed matter, which is quick drying and protects literature from ink smudging and finger marking and gives a silk finish.
A varnish applied to printed literature to protect against finger marking and smudging and gives a silk finish.
An even colour, which is not shaded. Areas on a page with solid colours are known as solids.
A colour, which cannot be made up of the four component colours - CMYK. They are listed in a pantone colour swatch book. For example, if a corporate logo contains a special blue and is included in a brochure with photographs and text; this is termed a five colour job. (CMYK (pictures+text) + special blue = 5 colours)
Two or more adjoining pages that would appear in view on a sheet.
Paper or card to be printed on.
Percentage shade of a colour.
Tagged Image File Format. A type of file, which stores an image.
Pages in a book excluding covers.
The process of overlapping adjacent colours to eliminate the white lines that could appear between them during the print process.
The assembly of text and pictures on a MAC or PC by keyboard or other digital means.
Short for 'typographical error' - a mistake in the copy.
A special varnish which has undergone an accelerated varnish drying process using ultra violet is applied to printed matter to enhance its appearance. A gloss UV Varnish is commonly used and this gives a very shiny effect, especially when used on printed matter with a matt laminate.
Special varnishes applied to printed matter to protect literature from ink smudging or finger marking or to enhance appearance. There are five main types - machine, gloss, matt and silk and UV. Varnishes are commonly used on matt or silk coated paper as these types are more prone to smudging than gloss coated paper. Varnish applied to a specific area of a document is known as spot varnish and when it is applied to the whole document it is termed as an overall varnish.
A preliminary layout, indicating the general design, and the position of the various elements.
Presses which are fed by paper from a reel, as opposed to separate sheets. They are normally used for high run work.